Jackson Noble Fir LED Pre-Lit Christmas Tree
Our Jackson Noble Fir replicates the dense, upswept branch pattern of old-growth Pacific Northwest noble fir. Each tip is molded from commercial-grade PVC in three distinct needle profiles to mimic the layered texture of a real noble fir canopy.
Warm white LED bulbs are factory-installed on every major branch, eliminating the need to string lights yourself. The steel center pole telescopes in three hinged sections for quick setup and compact off-season storage. We designed this tree for living rooms, entryways, and commercial lobbies that want realistic branch density without the mess of live needles.
- 7.5-foot height with 54-inch diameter at widest point
- 1,246 PVC branch tips in three needle profiles for natural taper
- 600 warm white LED bulbs pre-installed on branch wire
- Three-section hinged pole system with quick-lock joints
- Heavy-gauge steel tripod base with stabilizer feet
Branch construction & needle realism
We engineered the Jackson Noble Fir’s branch system to replicate the characteristic upward sweep and clustered needle arrangement found in Abies procera specimens. Each of the 1,246 tips uses injection-molded PVC in three distinct lengths — short inner needles transition to medium mid-branch clusters, finishing with long outer tips that create the signature noble fir silhouette.
Branches are permanently hinged to the center pole in a radial pattern that maintains 360-degree symmetry. When you unfold each section during setup, the branch wire holds its shape without additional fluffing or adjustment. The outermost tips retain enough flexibility to accept ornament hooks and garland without splitting, while inner branches provide structural support for heavier decorations. Our powder-coated steel pole runs the full height of the tree, so there’s no visible joint or wobble even when top-heavy ornaments are hung near the crown.
LED lighting system & electrical specifications
Six hundred warm white LEDs are pre-wired into the branch structure on the Home Accents Holiday Jackson Noble Fir, distributed evenly from base to crown. Each bulb draws 0.06 watts and emits 2700K color temperature light — the same warm tone as traditional incandescent mini-lights, but with 90% lower energy consumption and a 25,000-hour rated lifespan.
The lighting harness uses a parallel circuit design: if one bulb fails, the remaining 599 stay lit. A single polarized plug emerges from the base pole and connects to any standard 120V household outlet. Total power draw for the entire tree is 36 watts, roughly equivalent to a single old-style incandescent bulb. We include a spare bulb kit and a fuse-protected inline controller that lets you choose between steady-on and eight pre-programmed flash patterns, though most customers leave it on the default steady mode.
Assembly, storage & maintenance
Setup process
The Jackson Noble Fir ships in three hinged sections labeled A (base), B (middle), and C (crown). Unfold the tripod base and secure the floor lock. Insert section A into the base receptacle, then attach section B via the quick-lock collar — a half-turn clockwise locks it into place. Add section C the same way, connect the internal light harness clips, and plug the tree into your outlet. From box to fully lit takes about 15 minutes for a single person.
Off-season storage
Collapse the branches flat against the pole, disconnect the three sections, and slide the entire tree into the included canvas storage bag. The collapsed tree measures 52 inches long and 18 inches in diameter, fitting under most beds or on a garage shelf. Store in a climate-controlled space between 40°F and 90°F to prevent PVC degradation. Avoid attics or outdoor sheds where temperature extremes can warp branch wire.
More pre-lit Christmas trees from our collection
What people are saying
Common questions about the Jackson Noble Fir
Yes, the branch structure accommodates additional string lights if you want extra brightness or color accents. The pre-installed LED strings run along the inner branch wire, leaving the outer tips free for supplemental lighting. Keep total wattage under 500 watts to avoid overloading the internal wiring harness. Most customers find the factory-installed 600 LEDs provide sufficient coverage without additional lights.
The Jackson Noble Fir measures 54 inches in diameter at the widest branch tier, which sits approximately 30 inches above the floor. The base section is slightly narrower at 48 inches, and the crown tapers to 24 inches at the top. Plan for at least 60 inches of floor clearance to allow room for skirting and presents around the base.
Each LED is rated for 25,000 hours of continuous operation. If you light your tree eight hours per day for 45 days each holiday season, the bulbs will last approximately 70 years before reaching half-brightness. In practice, you’ll likely replace a handful of bulbs over the tree’s lifetime due to minor electrical surges or accidental damage during storage, not normal wear-out.
Yes, the tree’s power supply is compatible with any standard plug-in timer or smart outlet. The inline controller does not require manual activation after a power cycle — the tree returns to its last selected lighting mode when power is restored. We recommend a grounded timer rated for at least 5 amps to handle the tree’s 36-watt draw plus any additional decorations plugged into the same circuit.
No, the Jackson Noble Fir is rated for indoor use only. The electrical components are not weatherproofed against rain, snow, or high humidity. Outdoor temperatures below 40°F or above 90°F can warp the PVC branch tips and degrade the LED wiring. If you need an outdoor tree, look for models specifically rated IP44 or higher for exterior weather resistance.
The kit contains 50 warm white LED bulbs, a small flathead screwdriver for prying out dead bulbs, and a two-pack of spare inline fuses. Each bulb is a direct replacement for the factory-installed units and uses the same 2700K color temperature. The fuses protect the circuit from power surges — if an entire section of lights goes dark, replace the inline fuse before troubleshooting individual bulbs.
Allow a minimum 6-foot-diameter circle of clear floor space for the tree and surrounding decorations. The 54-inch branch spread means the outermost tips will extend 27 inches from the center pole in all directions. Most customers place a 48-inch or 52-inch tree skirt around the base, which leaves a few inches of clearance between the skirt edge and the lowest branch tier.